Over long periods of continuous operation, a layer of oxidized polymer slowly builds up on a polyolefin extruder, particularly on the inside barrel walls and the screw. Eventually, this degraded resin will begin to flake off. This, in turn, will cause many defects for finished products and processing as well. How to Clean well Plastic machines’ barrels and screws by using our CECN 100
CECN100 is compounded in pellet form with 5 % Ethoxylated Di-Nonylphenol. It is suitability for LLDPE, LDPE, HDPE, PP and all engineering plastic Machine such as extrusion Film Blowing, Bottle Blowing and Sheet Extrusion, Injection Molding…
Heat Resistance: 300ºC Recommend Dosage:
  |
| The CECN100 Machine Cleaning Pellets are imported by ICB from Thailand - Salee Colour Brand. |
Instruction for usage:
1.Clear all materials from the barrel.
2. Set barrel temperature between 180-240ºC depending on previous resin used.
3. Load 100 part of CECN 100 into the hopper of and let CECN100 fill up completely in barrel / nozzle/ die.
4. Stop screw and stand by for 5-10 minutes.
5. Purge out CECN 100 and follow by the natural resin and then begin new production.
6. If the machine is not clean enough, repeat process no. 3-5 again.
CECN 100 can be kept in the machine’s barrel during weekend as it helps to prevent screw oxidation and then purge out before production on the following working day. Food Contact Regulation Comply with the German BGA recommendation No.9 (178th Notification Federal Health Gazette 1988) on limits of heavy metals and primary aromatic amines, concerning colorants for plastics, which need to contact with food.
For your individual conditions and requirements, please contact us for accurate recommendations and further advice
www.ICBvn.com
Business Contact: 0903.772.421 - 0938.597.578 - 0903.742.955
